arthil.gif - 2,74 K



Welded Steel Pipes

The welded steel pipes are used for water and gas ducts and heating installations.

1. Quality

Standard Steel Grade
EN 10025 FU Fe 360 - B
Fe 310 - O
DIN 1626 RSt.37.0 USt.37.0
RSt.44.0
DIN 17100 USt.37.2
St.33
BDS 5785 10kp, 15, 15kp,
20, 20kp, 20ps
BDS 2592 ASt 3, BSt 2KP, BSt 3KP,
VSt 2KP, VSt 3KP

2. Dimensions

2.1. General purpose pipes

Outside diameter, mm Wall thickness, mm Length, mm
57 3.0
3.5
4.0
min 4000 max 12000
63.5 3.0
3.5
4.0
min 4000 max 12000
76 3.0
3.5
4.0
min 4000 max 12000
89 3.0
3.5
4.0
min 4000 max 12000

2.2. Pipes for tubular scaffold

According to BDS 8585:

Outside diameter - 48 mm ±0.4 mm
Wall thickness - 3.5 mm ±0.35 mm
Length - 7800 mm ±100 mm

2.3. Water-gas-duct pipes

Gauge Diameter, mm Length, mm
mm inches maximum minimum
10
15
20
25
32
40
50
65
80
3/8
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
17.5
21.8
27.3
34.2
42.9
48.8
60.8
76.6
89.5
16.7
21.0
26.5
33.3
42.0
47.9
59.7
75.3
88.0
min 4000
max 12000

Depending on the wall thickness, two types of water-gas-duct pipes are available
- ordinary pipes - wall thickness 2.6 - 4.5 mm
- strengthened pipes - wall thickness 2.9 - 5.4 mm

3. Tolerances

According to DIN 2440; DIN 2458; DIN 1626; DIN 1615; BDS 6360; BDS 8585; BDS 738

Pipes Outside diameter tolerance Wall thickness tolerance Length tolerance
General purpose pipes ±0.8 % ±10 %  
Pipes for tubular scaffold ±0.4 mm ±0.35 mm ±100 mm
Water-gas-duct pipes   - 12.5 %  

4. Mechanical requirements

According to DIN 2440; DIN 1615; BDS 738; BDS 8585.

The pipes are put to the 100 % test of the weld seam by physical methods without destruction, but are not put to the hydraulic-pressure test.

5. Packing and delivery

The welded steel pipes are delivered in bundles of up to 5 MT in weight, tightly tied at three points.




botonuk.gif - .965 K



ARTHIL TRADING COMPANY, S.L
Plaza Huerto Sogueros 7, 3º
12001 Castellón-España
Tel. 34-964/256455* Fax. 34-964/256615

E-mail:arthil@arthil.com



Anterior Home Posterior