Hot-rolled steel sheet distinguished for its surface quality and precision of dimensions is widely applied in all the industries both as a semi-finished product for the production of spiral-seam and stright-seam pipes as well as for direct usage.
1. Quality
| Quality | Standard | Steel grade |
| Carbon steel of commercial quality | BDS 2592 DIN 17100 EN 10025 ASTM 569M JIS G 3131 JIS G 3132 |
St 0, St 1, St 2, St 3, St 4 (all degrees of deoxidation) St 5ps, St 5 ps, St 6sp St.33; St37-2; USt.37-2; RSt.37-2 Fe 310 O; Fe 360 B FU Fe 360 B; FN Fe 360 B SS 330, SS 400 SPHC, SPHT, SPHT 2 |
| Carbon steel of structural quality | BDS 5785 DIN 1614 DIN 17210 DIN 17200 ASTM A570M A635M A568M A36M A284 |
08KP/PS, St10KP/PS, 15KP/PS, 20KP/PS, St25, St30, St35, St40, St45, St50,St55, St60 St 22, USt 23 C10, C15, C22, C25, C30, C35, C40, C45, C50, C55, C60 Gr30, Gr33, Gr36, Gr40 1006, 1008, 1009, 1010, 1012, 1015, 1017, 1020, 1006, 1008, 1009, 1010, 1012, 1015, 1017, 1020 A 36 Grade C |
| Deep-drawing steel | DIN 1614 | RRSt 23, RRSt 24 |
| Low alloyed steel of structural quality | BDS 4880 DIN 17102 |
09G2, 09G2B, 09G2C, 09G2BF, 10G2SAF TStE 355 |
| Alloyed steel of structural quality | BDS 6354 BDS 6742 DIN 17200 |
15G, 20G, 25G, 30G, 35G, 40G, 45G, 50G, 65G 15Mn 3, 30Mn 4 |
| Low alloyed steel with improved atmospheric corrosion resistance | BDS 15888 | Korat - 24, Korat - 30 Korat - 36 |
| Hot rolled boiler steel | BDS 5930 DIN 17155 |
12K, 16K H1, H11 |
| Low carbon "ARMCO" steel | BDS 10112 DIN 17405 |
E12, E10 RFe 120, RFe 100 |
2. Dimensions
2.1. Sheets
According to BDS 3992 and DIN 1543.
| Thickness, mm | Format (width x length), mm |
Widths upon special order, mm | |||||||
|---|---|---|---|---|---|---|---|---|---|
| 770 800 |
800 850 |
900 950 |
1000 1050 |
1100 1150 |
1200 1250 |
1300 1350 |
1400 1500 |
||
| Lengths upon special order, mm | |||||||||
| 2.0; 2.2; 2.5;2.8; |
800 x 2000 1050 x 2000 |
2000 - 3000 | |||||||
| 3.0; 3.2; 3.5; 3.8; |
1000 x 2000 1050 x 2000 |
||||||||
| 4.0; 4.5; 5.0; |
1250 x 4000 1250 x 6000 |
2000 - 6000 | |||||||
| 6.0; 7.0; 8.0; 9.0; 10.0; |
1000 x 4000 1250 x 4000 |
||||||||
| 11.0; 12.0; |
1500 x 4000 1500 x 6000 |
||||||||
2.2. Coils
According to BDS 3992 and DIN 1543.
| Thickness, mm | Width, mm | |||||||
|---|---|---|---|---|---|---|---|---|
| 770 800 |
800 850 |
900 950 |
1000 1050 |
1100 1150 |
1200 1250 |
1300 1350 |
1400 1500 |
|
| 2.0, 2.2 2.5, 2.8 |
x | x | x | x | ||||
| 3.0, 3.2 3.5, 3.8 |
x | x | ||||||
| 4.0, 4.5 5.0 |
||||||||
| 6.0, 7.0, 8.0 9.0, 10.0 |
||||||||
| 11.0 12.0 |
||||||||
Weight of coils - up to 15 MT, inside diameter - 850 mm ± 7%.
2.3. Checkered Plate
According to BDS 9328 and DIN 59220.
| Thickness, mm | Width, mm | |||
|---|---|---|---|---|
| 770 | 800 | 1000 | 1250 | |
| Length, mm | ||||
| 4.0 5.0 6.0 7.0 8.0 |
2000-6000 | |||
| The sheet is delivered also in coils with inside diameter 850 mm ± 7%. | ||||
2.4. Strip
According to BDS 5928 and DIN 1016.
| Thickness, mm | 3.0 - 6.0 |
|---|---|
| Width, mm | 120 - 400 250 - 600 |
| Outside diameter of the coil, mm | 1100 - 1900 |
| Inside diameter of the coil, mm | 740 |
3. Tolerances
According to: BDS 3992; BDS 9953; BDS 9328; BDS 5928; DIN 1543; DIN 1016; DIN 59220; ASTM A6M; ASTM A568M; ASTM A635M; JIS G 3193.
4. Packing and delivery
4.1. Sheet
Hot rolled steel sheets are delivered in bundles of up to 15 MT in weight. The sheets are placed on wooden supports and are tied with steel straps crosswise and longitudinally.
4.2. Coils
Hot rolled coils are delivered of up to 15 MT in weight, tied with straps radially and along periphery.
 |
 |
ARTHIL TRADING COMPANY, S.L
Plaza Huerto Sogueros 7, 3º
12001 Castellón-España
Tel. 34-964/256455* Fax. 34-964/256615
